Home › Concrete Repair and Resurfacing
Restore damaged slabs with expert concrete repair in Collierville, TN. We fix cracks, spalling, and settled sections on driveways, sidewalks, and patios using proven repair methods. When surfaces are worn but structurally sound, we offer concrete resurfacing overlays to provide a fresh, attractive finish without full replacement.
Collierville Concrete Company provides professional concrete repair throughout Collierville, TN, Tennessee and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call (901) 582-5672 or request your free quote.
Concrete repair in Collierville that fixes the cause, not just the crack
At Collierville Concrete Company, our concrete repair and resurfacing work starts with figuring out why the concrete failed in the first place. Around Collierville and eastern Shelby County, we see the same issues over and over: clay soil that expands and shrinks with moisture, driveway sections that were poured too thin, pool decks without proper drainage, and front walks that settled after utility work.
Before we quote anything, we inspect the slab, look for signs of soil movement, check drainage patterns, and ask how old the concrete is and how it has been used. That tells us whether you need structural repair, cosmetic resurfacing, or both. You will hear us explain things in plain language, such as “this corner is dropping because water collects here” or “these spider cracks are surface level and can be resurfaced.” Our goal is to give Collierville homeowners repairs that last through our freeze-thaw cycles, summer heat, and heavy use, not a quick patch that flakes off next year.
Common concrete problems we fix in Collierville, TN
Because we work almost entirely in the Collierville area, we see predictable patterns in concrete damage:
• Driveways with sunken tire paths where vehicles sit in the same place every day.
• Cracked sidewalks along Poplar, Byhalia, and neighborhood streets where tree roots push up from underneath.
• Chipped and pitted pool decks where salt, pool chemicals, and sun have worn away the finish.
• Garage floors that have spalled, which is where the top layer breaks apart into small chips and dust.
• Front porches and steps that have settled away from the house, leaving a trip hazard and a gap that collects water.
During your assessment, we separate “ugly but sound” from “unsafe or failing.” Hairline cracks that are not moving can often be repaired and then hidden by resurfacing. Wide or changing cracks, significant sinking, or hollow-sounding slabs may require partial replacement or slab lifting. We are upfront when a section is too far gone for resurfacing so you do not waste money on a fix that will not hold up to daily use.
Our concrete repair process, step by step
Every repair project with Collierville Concrete Company follows a structured process so you know exactly what is happening at your property.
1. Assessment and measurements. We walk the entire area with you, mark problem spots, measure settlement or heaving, and take moisture and drainage into account. We document existing damage so you can compare before and after.
2. Surface preparation. Good prep is what makes a repair last. We clean the concrete with mechanical scrubbing or pressure washing (at a safe pressure so we do not open new cracks), remove loose material with grinders or chipping hammers, and widen narrow cracks into a proper repair groove when needed so patching compounds can bond fully.
3. Structural repair. For active or wide cracks, we may use epoxy or polyurethane injection to bind fractured sections together. For settled slabs, we discuss options like slab jacking (lifting with a grout mixture) or partial demo and re-pour. At joints, we replace failed expansion material to let sections move without new cracking.
4. Patching and rebuilding. We fill cracks, holes, and spalled areas with repair mortars designed to match your slab strength and use, for example a high-strength mix for driveways and a smoother mix for patios or interior floors. Larger edge breaks may be rebuilt with forms so the repaired section keeps its original shape.
5. Resurfacing or finishing. If the underlying concrete is sound, we can apply an overlay, microtopping, or skim coat to unify the appearance. We work the new surface to mimic broom finishes, troweled finishes, or decorative textures so repaired areas blend and you do not end up with a patchwork look.
6. Sealing and curing. Finally, we apply appropriate sealers, explain realistic curing times for our humid Tennessee climate, and give you written care instructions so you know when you can walk, drive, or place furniture on the surface.
Concrete resurfacing options to refresh worn surfaces
Resurfacing is ideal when your concrete is structurally solid but looks tired, stained, or lightly pitted. Around Collierville, we often resurface older driveways, porches in established neighborhoods, and pool decks that are slippery or faded.
For basic resurfacing, we install a polymer-modified overlay that bonds tightly to the existing slab. This creates a new wear layer that can be broom finished for slip resistance, lightly textured for bare feet around a pool, or smoothed for interior or covered spaces. Thickness is usually between 1/16 and 1/4 inch, enough to refresh the surface without raising heights at thresholds.
If you want more design impact, we offer decorative resurfacing options. These include saw-cut patterns that mimic stone or tile, two-tone finishes that highlight borders, and custom colors that coordinate with brick, siding, or landscaping. We often help Collierville homeowners choose colors that look natural next to local red and tan brick, not overly bright shades that clash with the home.
Resurfacing is not right for every slab. If your concrete is badly broken, moving, or crumbling deeply, we will explain why resurfacing would fail and recommend spot replacement instead. We would rather lose a job than sell a resurfacing coating that we know will peel or crack in a year or two.
What affects the cost of concrete repair and resurfacing
We price concrete repair and resurfacing based on the actual work needed, not a flat per-square-foot number. Several factors tend to drive cost for Collierville projects:
• Size and access. A small front stoop that is easy to reach usually costs less per square foot than a fenced-in backyard patio that requires more setup and material handling.
• Type and severity of damage. Simple crack filling and resurfacing is more economical than slab lifting, partial demolition, or structural repair with epoxy injection.
• Finish level. A basic broom-finished overlay is less expensive than decorative resurfacing with multiple colors, borders, or custom patterns.
• Existing conditions. Oil stains, thick sealers, or prior failed coatings must be removed before we can bond new material, and that extra prep time affects price.
During your estimate, we break the cost into logical parts, such as prep, repair, overlay, and sealing, so you can see exactly where your money is going. We can sometimes phase projects for budget reasons, for example repairing worst trip hazards first, then resurfacing the rest later. You will never get a surprise upcharge on site for standard conditions we should have seen during the walkthrough.
Planning your project in our local climate
Concrete work in Collierville has to be scheduled around humidity, rain, and temperature swings. Collierville Concrete Company plans your repair or resurfacing so materials cure correctly and your results last.
In the summer, we often schedule work earlier in the morning so overlays and repair mortars are not installed on a scorching hot slab that can flash dry the surface. In cooler months, we watch overnight lows to ensure repairs are not placed right before a hard freeze. We also consider shade, tree cover, and sprinkler systems, all of which affect curing and long-term performance.
We will talk with you about timing around family use as well. For example, you may want to repair a pool deck in early spring before swimming season, or handle driveway repairs while you can park on the street. We provide written guidance on traffic times, when to move planters or grills back, and how to avoid early damage like tire scuffing while the concrete reaches full strength.
Why Collierville homeowners trust Collierville Concrete Company
Collierville Concrete Company focuses on local residential work, so we see our projects again when we drive through town, visit friends in your neighborhood, or attend local events. That matters to us. Our repairs are done with the expectation that you might call us back in five years, not because something failed, but because you want to tackle another project.
We explain repair choices in terms of your specific slab, not a generic script. If a low-cost crack repair is appropriate, we say so. If a full replacement of one section is the only honest option, we tell you that as well and explain why. Our crews keep work areas tidy, manage dust and debris, and respect landscaping, which is especially important in tight Collierville lots where lawns and beds border driveways and walks.
Before we leave, we walk the project with you, point out what was done where, and review maintenance steps like when to reseal, how to manage drainage, and what to avoid on the surface. Our aim is for you to feel confident that your concrete repair or resurfacing was handled correctly, that it fits your budget and your home, and that you have a reliable local company to call if anything ever needs attention in the future.
